Dreame L40 Ultra Mode D'emploi page 12

Routine Maintenance
EN
Dust Box and Filter
1. Open the robot cover and press the dust box clip to remove the dust box.
2. Open the dust box cover, remove the filter, and then empty the dust box as
shown in the diagram.
20
3. Gently tap the basket of the filter to remove the dirt.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects
to prevent damage.
4. Rinse the dust box and filter with water and dry them completely before
reinstalling.
24h
Note:
·
Rinse the dust box and filter with clean water only. Do not use any detergent.
·
Use the dust box and filter only when they are completely dry.
Routine Maintenance
Main Brush
1. Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
2. Pull out the brush covers at both ends of the brush as shown in the figure.
Use the provided cleaning tool to remove any hair tangled in the brush.
Reinstall the brush covers on both ends of the brush, and then reinstall the
brush. Press on the brush guard to lock it in place.
Side Brush
Unscrew the side brush with a screwdriver, clean the hair from the brush, and
then screw it back on.
EN
21