Publicité
Les langues disponibles
Les langues disponibles
Routine Maintenance
EN
Mop Pad Holder
Remove and clean the mop pad holder.
Omnidirectional Wheel
Note:
·
Use a tool such as a small screwdriver to separate the axle and tire of the
omnidirectional wheel. Do not use excessive force.
·
Rinse the omnidirectional wheel under the running water and put it back
after drying it completely.
22
Robot Sensors
Wipe the robot sensors by using a soft and dry cloth, as shown in the below
figure:
Bumper Window
Laser Distance
Sensor (LDS)
Bumper
Edge Sensor
Cliff Sensors
Carpet Sensor
Note: A wet cloth can damage sensitive elements within the robot and the
base station. Please use a dry cloth for cleaning.
Routine Maintenance
Charging Contacts and Signaling Area
Clean the charging contacts and the signaling area with a soft and dry cloth.
Auto-empty Vents
Clean the auto-empty vents of the robot and the base station with a soft and
dry cloth.
Mop Pad
Remove the mop pad from the mop pad holder to replace it.
Battery
The robot contains a high-performance lithium-ion battery pack. Make sure
that the battery remains well-charged for daily use to maintain optimal
battery performance. If the robot is not used for an extended period of time,
turn it off and put it away. To prevent damage from over-discharging, charge
the robot at least once every three months.
EN
23
Publicité
