Publicité
Les langues disponibles
Les langues disponibles
Routine Maintenance
EN
Parts
To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance.
Part
Maintenance Frequency
Replacement Period
Used water tank
After each use
/
Clean water tank
Main brush
Every 6 to 12 months
Once every 2 weeks
Dust box's filter
Every 3 to 6 months
Side brush
Mop pad holder
/
Washboard
Once every 2 months
/
Base station's
signaling area
Charging contacts
Auto-empty vents
Omnidirectional
Once every month
/
wheel
Edge sensor
Laser Distance
Sensor (LDS)
3D line laser
sensor
16
Part
Maintenance Frequency
Replacement Period
Carpet sensor
Cliff sensors
Bumper Window
Once every month
Bumper
/
Robot's automatic
water refilling inlet
Bottom of the robot
Dust box
Clean it as needed
Dust bag
Every 2 to 4 months
/
Mop pad
Every 1 to 3 months
Note: The replacement frequency will depend on your usage of the robot.
If an exception occurs due to special circumstances, the parts should be
replaced.
Routine Maintenance
Washboard Base
The base station will perform washboard self-cleaning along with each mop
pad cleaning. For deep cleaning, please refer to the following steps.
1. Enable the washboard base cleaning function in the app, and the robot
will exit the base station automatically. Take out the washboard and wait for
water to fill the washboard base.
2. Use the cleaning tool to clean the washboard base. After a moment, the
base station will automatically pump out the used water. Then wipe the
washboard base with a soft and dry cloth.
3. Flip the washboard over, remove the roller cover and the roller in turn, and
then pull off the end caps of the roller.
Wipers
Note:
·
If the roller cover is blocked by wipers on both sides of the washboard,
rotate the roller to move them aside.
·
The roller cover can be removed with an appropriate tool, such as the
provided cleaning tool.
4. Remove the hair tangled in the roller, and then reassemble the parts
according to corresponding colors, as shown in the figure below.
EN
17
Publicité
