SilverCrest SFPM 600 A1 Mode D'emploi page 14

7.4 Power supply
DANGER! Risk of injury!
Do not insert the mains plug 10 into a
wall socket until the food processor has
been completely assembled for the intend-
ed purpose.
Insert the mains plug 10 into a wall socket
that corresponds to the technical data on the
rating plate. The wall socket must still be eas-
ily accessible after connection.
7.5 Switching on and off
and adjusting the
speed
Use the dial 11 to switch the device on and
off and select the speed setting:
Switch
position
Pulse function:
- Hold the dial 11 in the P
position to switch on the de-
vice.
- Release the dial 11 to
P
switch off the device.
- Enables working with several
brief pulses in a row – recom-
mended e.g. for herbs and
onions
0
turned off
1
Speed setting 1 (normal)
2
Speed setting 2 (high)
NOTE: when selecting the speed setting,
consult the recommendation in the tables.
12 GB
Function
8. Using the blade
assembly
DANGER! Risk of injury!
The blades of the blade assembly 5 are
very sharp. Do not touch them. Attach
the blade guard 6 when you are not us-
ing the blade assembly 5.
• Removing the blade guard:
Pull the blade guard 6 in the middle
slightly away from the blade assem-
bly 5 and remove this by pulling up-
wards.
• Attaching the blade guard:
Place the blade assembly 5 into the
blade guard 6 from the top. Make sure
that both blades are completely protect-
ed.
Application area:
The blade assembly 5 is suitable for chop-
ping onions, herbs, vegetables, fruit, hard
cheese (e.g. Parmesan) and meat.