afriso TankControl 10 Notice Technique page 71

5.2 Mounting the submersible probe
INCORRECT MEASUREMENT RESULTS
• Verify that the submersible probe does not reach possible sludge accumula-
tion at the bottom.
Failure to follow these instructions can result in equipment damage.
A
Fig. 8: Mounting the submersible probe
1. Plug the star onto the pressure sensor.
- Verify that the ribs at the star fit.
2. Screw the spacer with the star onto the pressure sensor.
Mounting
B
C
NOTICE
A. Spacer
B. Star
C. Pressure sensor
TankControl 10
EN E N
21