Publicité
Les langues disponibles
Les langues disponibles
3. Mount the moisture-proof junction box to the wall.
4. Route the cable of the the control unit into the moisture-proof junction box.
5. Mount the submersible probe (see "Mounting the submersible probe").
6. Route the cable of the submersible probe to the moisture-proof junction
box.
7. Connect the cables using the terminal strip.
Mounting
Mounting type B
1. Drill two fixing holes with a
Ø 5 mm into the base.
2. Mount the control unit to
the wall with the enclosed
screws.
TankControl 10
EN E N
19
Publicité
