8
MAINTENANCE
8.1
Weekly, by a trained operator.
A. Drain the tank.
B. Pour very hot water into the tank and start a mixing cycle
Stop the cycle by pressing the
C.
D. Turn off the isolator switch.
E. Remove the plug from the socket.
F. Drain the tank again and clean it with hot water and a damp cloth.
G. Use a damp cloth to clean the outside.
H. Clean with a brush and vacuum the inside of the machine (cooling unit and electrical part).
Never leave the tank empty for several days at a time; always leave a little water (2-3 cm) at the bottom of the
tank to prevent premature wear of seals.
9
CONSUMABLES
When ordering spare parts, check with your approved agent which part is required based on the
spare parts catalogue issued by the manufacturer.
Always quote the machine serial number shown on the nameplate.
Your agent will place the orders with JAC.
9.1
List of CONSUMABLES
ITEM CODE
F7002003
F7002028
F7002029
F7002030
F7007009
English
NEVER WASH THE MACHINE BY HOSING IT DOWN
NEW DESCRIPTION
BELT
TANK SEAL
TANK SEAL
TANK SEAL
CONTROL SCREEN
+
+
keys simultaneously.
16
.
MODEL
TL 40
TL 40
TL 105
TL 220
ALL