EUROM Heat and Beat Manuel D'utilisation page 27

hole. Place the hanging bracket (11) between both holes as indicated on the
diagram. Push the pin with the second screw back through the holes and the
hanging bracket. Then place the first Allen screw back and turn to secure using the
Allen key.
The Eurom Heat and Beat can be installed in three ways:
 Suspension from a wall (or possibly ceiling) by means of a wall bracket
 Suspension from a frame (parasol, tent or similar item) by means of a bracket
 Suspension from a ceiling by means of chains
Remove all package material (including the shock absorbing material around the
bulb) before installating the heater and check the appliance, supply cord and the
plug for signs of damage.
Carefully choose the right place to install your heater.
Before fastening, check that the minimum safe distances between the surroundings
and the chosen location are respected:
Minimum distance lowest point of heater – floor: 1,8 metres
Minimum distance heater – heated object: 1 metre
Minimum distance top* heater – fire-resistant ceiling: 0.25 metres
Minimum distance top* heater – tent tarpaulin, parasol etc.: 0.5 metres
Minimum distance side heater – walls, obstacles, objects: 0.5 metres
* The top of the heater is the side where the suspension bracket is attached.
If you suspend the device outside, ensure that it is protected from the wind.
1. Suspension from a wall (or possibly ceiling) by means of the wall bracket
 The appliance has to be mounted preferably on
an incombustible foundation. That foundation
has to be vibrationfree, exact vertical and stable
enough for lastingly holding the appliance free of
problems. Check or the provided dowels and
screws are suitable, strong enough and qualified
for the foundation. The material provided is
identified for a brick wall; for another foundation
please ask the specialist for suitable material.
 Fix the mounting bracket totally horizontal on
the wall with the four anchor dowels provided
see fig.
 Hang the terrace heater with the suspension
bracket in the wall bracket. Refer to the
picture. Slide the bracket through the wall
bracket as far as possible – the small hole in
the bracket protrudes under the wall bracket.
Secure that terrace heater by screwing the
short wing nut supplied as far as possible into
the small hole in the suspension bracket.
27