♦
As soon as the set temperature is reached, an acoustic signal will sound .
In addition, the colon of the time indicator
display
♦
If you press the button
temperature
In addition, the set cooking temperature
time
of the cooking time
time .
♦
When the time has elapsed, the appliance will switch off automatically and
the display
♦
Remove the cooked food from the pot using a suitable tool (e .g . kitchen or
barbecue tongs) .
♦
Pull the mains plug out of the power socket and take the appliance carefully
out of the pot . To do so, open the pot clip
►
CAUTION – PROPERTY DAMAGE!
►
♦
Cut open the vacuum bag and remove the food . Depending on the type of
food cooked, your meal can be served immediately or must be prepared
further (e .g . briefly fried) .
♦
When you switch the appliance on again, the last set temperature will flash
on the display .
■
28
│ GB│IE
and the cooking time will be counted down by minutes .
/
and cooking time
will flash when you press the button
will flash when the button
will go out . You will hear beep sounds .
DANGER!
Do not touch the hot heating element
heating element . There is a risk of burns and scalding .
Do not place the appliance on any flammable surface, such as wood .
will start to blink on the
during the cooking process, the set cooking
will be displayed for a few seconds .
or the set hours of the cooking
/
again . The set minutes
/
.
. Hot water can drip from the
is pressed another
SSVS 1000 B2