Publicité
Les langues disponibles
Les langues disponibles
Storage conditions
4.2
Fastening the transport lock
AB2200en
■
Humidity must not be condensing. Humidity must be between 10% and
80%.
■
Be aware of the weight of the device.
■
When transporting using a transport aid (e.g., a pallet truck), the trans-
port aid must be able to carry at least 1.6 times the transport weight of
the device.
■
Secure the device to prevent it tipping over and falling down during
transport.
■
Never transport the device sideways or upside down.
■
The device must be stored in the original packaging.
■
Only store the device in dry rooms.
■
The storage temperature must be between -20 °C and +60 °C.
■
Humidity must not be condensing. Humidity must be between 10% and
80%.
Personnel:
■
Trained user
3
2
3
2
1
2 3
Fig. 13: Transport lock
1
Transport lock
2
Screws
3
Spacer sleeves
4
Right side of device
5
Bellows
1.
For MIKRO 220 R:
Open the lid.
Check the bellows (
seating.
2.
Close the lid.
3.
Lay the device down onto its right-hand side (
4.
Insert 3 transport locks (
5.
Screw in 3 screws (
Rev.: 15 / 01.2024
Transport and storage
5
4
5 ) underneath the motor cover for correct
1 ).
2 ) with spacer sleeves ( 3 ).
1
3
2
4 ).
17 / 39
Publicité
