Milnor MilTouch MWF100Z7 Guide De L'opérateur page 33

Troubleshooting
Modify Steam and Cooldown
Figure 19. Pop-up Controls for Steam and Cooldown Valves
Inject steam to raise or maintain the bath temperature. If the steam inlet valve is open,
touch to close it.
Inject cool water to gradually lower the bath temperature (perform a cooldown). If the
cooldown inlet valve is open, touch to close it.
Close the window.
Modify Cylinder Speed
Figure 20. Pop-up Controls for Cylinder Speed
Increase the rotation speed of the cylinder by 1 RPM.
Decrease the rotation speed of the cylinder by 1 RPM.
Close the window.
Modify Water Temperature
24.
Figure 21. Pop-up Controls for Water Temperature
Increase the desired bath temperature by 1 degree (Celsius or Fahrenheit).
Decrease the desired bath water temperature by 1 degree (Celsius or Fahrenheit).
Close the window.
26
— Touch the box labelled "Heat/Cool" on the display.
— Touch the box identified by item C on
— Touch the box identified by item Tw on
Figure 15, page 24.
Figure 15, page
Pellerin Milnor Corporation