Publicité
Les langues disponibles
Les langues disponibles
a. Touch the value labelled "Customer."
b. Use the keypad to enter a customer code number.
4. Enter the actual weight of the goods in the cylinder.
a. Touch the value labelled "Weight 1."
b. Use the keypad to enter the weight of the goods.
NOTE: Ensure that you measure and enter the actual weight of goods in the
same unit (pounds or kilograms) as the configured machine capacity.
5. Touch
to save all the data entered in the window and start the formula.
The Run display appears and the door to the washer-extractor locks.
3.8.2
To Run a Wash Formula from the Mildata
NOTE: When you enable your controller to run Mildata
become unavailable.
1. On the Home display, touch
NOTE: If you used an op-
tional feature such as a bar-
code scanner or load cells,
instead touch
feature display (such as the
Weighing System display,
Barcode display, etc.).
2. The Remote Formula window
ure 8, page
17) appears. In the Re-
mote Formula window:
a. Enter the formula number for your
goods type, or the formula that
your chemical supplier or laundry specialist programmed to use Liquor Ratio Control.
b. Enter the load data. The available fields correspond to the Mildata
decisions.
You must enter the actual weight of the load to use Liquor Ratio Control. Ensure that you
measure and enter the actual weight of goods in the same unit (pounds or kilograms) as
the configured machine capacity.
NOTE: If you used load cells to weigh the goods, the weight data is entered
automatically.
Pellerin Milnor Corporation
Figure 8. Remote Formula Window
.
from the
(Fig-
®
Computer
BNCLJO06.T05 0000194242 F.3 F.2 H.3 3/5/21, 9:45 AM Released
®
formulas, the local formulas
®
Normal Operation
configuration
17
Publicité
