Publicité
Les langues disponibles
Les langues disponibles
Figure 13. Standard Controls
3.9.2
Respond to the end of the cycle.
The operator signal will sound when the cycle ends.
BNWBUO04 / 2023284
3.10
Jog and unload the cylinder.
Use the jog direction switch (
cylinder.
NOTE: The jog feature is disabled on machines that are equipped with load cells.
1. Unload the cylinder.
2. With one hand, hold the jog direction switch (
3. With the jog direction switch still held, use your other hand to hold the door unlock button (
) depressed so that both controls are actuated simultaneously.
The cylinder turns slowly, in the selected direction.
4. Change rotation direction and rotate again, if necessary.
5. When you have finished unloading the machine, close the door.
Pellerin Milnor Corporation
C. Cancel the formula (see
M. Actuate manual controls
D. Run diagnostics (see reference manual)
BNWBUO02.T01 0000279617 A.7 C.5 F.2 9/11/20, 10:37 AM Released
BNWBUO04
0000279926
BNWBUO02.T02 0000279616 A.12 B.3 F.2 9/16/20, 3:29 PM Released
) to loosen the goods and assist them to come out of the
) in the desired direction of rotation.
Normal Operation
Legend
Section 4.1.4 , page
27)
(Section 4.1.3 , page
23)
F.2
7/12/23, 4:05 PM
Released
21
Publicité
