Milnor MilTouch MWF100Z7 Guide De L'opérateur page 21

Normal Operation
NOTE: If your machine is configured to run Mildata
the Home display instead.
The Weighing System display appears, shown in the following figure.
Figure 6. Weighing System Display
3. On the Weighing System display, touch the button labeled "Compartment 1" to activate the
load cell (scale) in the cylinder.
The scale tares to zero and the weight value turns green, as shown below.
CAUTION: People or objects leaning on the machine — can cause inaccurate weight
4. Load the cylinder according to the recommended load size for your goods type. The load cells
weigh the goods as you load the machine, and the controller displays the current weight, as in-
dicated by item C in
14
readings.
Do not lean on the machine.
�
Do not rest heavy objects against the machine.
�
Do not push objects such as laundry carts against the machine.
�
Figure 6, page 14.
® formulas, touch
Legend
A... Cancel the formula and re-
turn to the Home display
B... Touch the compartment but-
ton to begin loading
C... Displays the current weight
of the goods in the cylinder
D... Displays the maximum ma-
chine capacity
E...
Start the formula
F...
Feature currently not used
on MilTouch™ machines
G... Tares the scale back to zero.
The weight will not tare if
you have already confirmed
it (the display is red).
H... Enter the weight manually
for this load (see Section
3.8.1.2 , page 16).
I...
The customer (commercial
laundry) or department (insti-
tutional laundry) the batch
(goods) belongs to
Pellerin Milnor Corporation
from