Publicité
Les langues disponibles
Les langues disponibles
Main Controls
extractors.
Master power switch (
trol system.
Remove power from the control system.
Energize the control system.
Touchscreen for the MilTouch™ controller — This is a touch-sensitive display screen that
you use for most machine functions.
Door unlock button (
opened. This button is only active when the machine is idle and the water in the machine is below
door level.
Loading Controls
load and unload the machine.
Jog direction switch (
clockwise or counterclockwise to help you load or unload the machine. The arrows indicate the
direction of rotation.
To rotate the cylinder, hold the jog direction switch in the desired position while you hold the
door unlock button (
Rotate the cylinder clockwise.
Rotate the cylinder counterclockwise.
NOTE: The jog feature is disabled on machines that are equipped with load cells.
BNVLUO01 / 2018513
2.2
Emergency Stop Switch (locking push button)
One or more emergency stop switches (pictured below) may be provided on the device. When
pressed, any emergency stop switch removes power from the machine controls, stops the ma-
chine, and locks in the depressed (switch actuated, machine stopped) position. When safe to do
so, turn the button clockwise to unlock the switch. To resume operation, perform the device's nor-
mal startup procedure.
Pellerin Milnor Corporation
— The controls listed in this section occur on all MilTouch™ washer-
) — This switch energizes and removes power from the con-
) — This button frees the door latch so the door can be unlatched and
— The controls listed in this section can be used to help the operator
) — This switch allows you to rotate the cylinder slowly
) depressed.
BNVLUO01
0000189558
F.2
BNVLUO01.C01 0000189557 B.4 F.2 12/9/20, 9:19 AM Released
Controls
1/2/20, 2:17 PM
Released
5
Publicité
