Milnor MilTouch MWF100Z7 Guide De L'opérateur page 20

a. Touch the button labelled "Operator" in the bottom right corner of the display (item J in
Figure 5, page
b. In the Operator Initial window, use the keypad to enter the operator's initials (up to 3
characters).
c. Touch to confirm your entry and close the Operator Initial window.
NOTE: See the separate reference guide for more information on the GearTrace™
tracking system and GearTrace™ production reports.
3.5 Jog and load the cylinder.
Jog the cylinder to help compact and distribute the goods inside the cylinder.
The jog feature is disabled on machines that are equipped with the optional weighing system
(load cells). If your machine is equipped with load cells, see
on how to load your machine.
DANGER:
1. Load the cylinder with goods.
NOTE: If you are using Liquor Ratio Control, weigh the goods in the batch (with a
laundry scale, weighing-type load conveyor, etc) and record the weight before you
load the machine.
2. With one hand, hold the jog direction switch (
3. With the jog direction switch still held, use your other hand to hold the door unlock button (
) depressed so that both controls are actuated simultaneously.
The cylinder turns slowly, in the selected direction until you release the button.
4. Change rotation direction and rotate again, if necessary.
3.6 Load the cylinder (optional weighing system).
Use the following instructions to load your machine if it is equipped with the optional weighing
system (load cells). Skip to step 2 if you used a barcode scanner to scan the goods in the batch.
1. On the Home display, select the formula for your goods type. If you are using a flow meter,
select the formula that your chemical supplier or laundry specialist set to use Liquor Ratio
Control (see Section 3.8.1.1 : About the Liquor Ratio Control Feature, page
2. Touch from either the Barcode display or the Home display.
Pellerin Milnor Corporation
12). The Operator Initial window (not shown) appears.
Goods in the rotating cylinder — will wrap around, and twist off your
arm.
Never reach into, or pull linen from a turning cylinder, even if it is
�
turning slowly.
BNCLJO09.T05 0000279536 E.3 F.2 A.16 9/16/20, 10:30 AM Released
Section 3.6 , page 13
) in the desired direction of rotation.
BNCLJW01.T04 0000251284 E.3 F.2 F.6 4/12/21, 2:06 PM Released
Normal Operation
for instructions
16).
13