Milnor MilTouch MWF100Z7 Guide De L'opérateur page 19

Normal Operation
Figure 5. Barcode Display
3. Touch the barcode entry box at the top of the display (item D in the figure) so that a cursor ap-
pears inside.
4. Use your barcode scanner to scan a barcode.
The scanned barcode number appears in the barcode entry box.
5. Touch to add the scanned barcode from the barcode entry box to the list of barcodes in
the batch.
6. Repeat steps 3 through 5 until you have scanned the barcodes on all the goods.
7. If desired, briefly describe why each item is being processed. This information will appear in
GearTrace™ production reports.
a. Touch the barcode number for the item you want to describe. The barcode number turns
green, and the "Description" button next to it becomes enabled.
b. Touch the "Description" button. The Barcode Description window (not shown) appears.
c. In the Barcode Description window, use the keypad to enter a description.
d. Touch to save the description and close the Barcode Description window.
8. Enter the operator's initials. This information will appear in GearTrace™ production reports.
The operator's initials may or may not be required depending on your machine's configura-
tion settings.
12
Legend
A...
Go back to the previous display.
B...
Scroll between pages to view
more scanned barcodes.
C... Return to the Home display.
D... Barcode entry box. Scanned
barcodes appear here before you
add them to the list (item E).
E... Scanned barcode numbers in the
batch.
F... Briefly describe why the item is
being processed. This informa-
tion will appear in barcode pro-
duction reports.
G... Start the formula.
H... Add a scanned barcode from the
barcode entry box (item D) to the
list (item E).
I... Delete the selected barcode from
the list.
J... Enter the operator's initials. This
information will appear in bar-
code production reports.
Pellerin Milnor Corporation