Abicor Binzel xFUME ADVANCED HP 230V CSA Mode D'emploi D'origine page 33

xFUME™ ADVANCED HP 230V – CSA
12 Disassembly
Disconnect the compressed air supply.
1.
Remove the current clamp from the cable
2.
assembly.
Remove the extraction hose(s).
3.
Loosen the top and bottom tension locks on
4.
either side.
Remove the housing and set to the side.
5.
Loosen the castors.
6.
BAL.0814.0 • V01
Risk of injury due to unexpected start
If power is supplied during maintenance, cleaning or disassembly, rotating parts can
start running unexpectedly and lead to injuries from cuts.
► Switch off the device.
► Disconnect all electrical connections.
CAUTION
12 Disassembly
EN - 33