Publicité
Les langues disponibles
Les langues disponibles
2 Safety
2.4.3
Safety instructions for electrical components
► Check electric tools for damage and ensure that they function properly and in accordance with
their designated use.
► Do not expose electric tools to rain and avoid a moist or wet environment.
► Protect yourself from electric shock by using insulating mats and wearing dry clothing.
► Do not use the electric tools in areas subject to fire or explosion hazards.
2.4.4
Safety instructions for welding
► Arc welding can damage eyes, skin and hearing. Note that further hazards can occur in
connection with other welding components. For this reason, always wear the mandatory
protective clothing in accordance with local laws and directives.
► All metal vapors, especially lead, cadmium, copper and beryllium, are harmful. Ensure sufficient
ventilation or extraction. Do not exceed the established occupational exposure limit (OEL).
► To prevent phosgene gas from forming, always use clear water to rinse workpieces that have
been degreased using chlorinated solvents. Do not set up degreasing baths containing chlorine
near the welding station.
► Adhere to the general fire protection regulations and remove flammable materials from the
vicinity of the welding work area prior to starting work. Provide suitable fire extinguishing
equipment in the work area.
2.4.5
Safety instructions for personal protective equipment
► Do not wear any loose clothing or jewelry.
► Wear a hairnet over long hair.
► Note local laws and directives concerning protective equipment.
► Make sure that any third parties in the direct vicinity are wearing personal protective
equipment.
► Wear your personal protective equipment according to the hazard.
2.4.6
Safety instructions for fume extraction (in accordance with DIN EN ISO
21904)
From the first time it is used, the unit contains harmful dust that can settle on surfaces and get into
the ambient air. The respiratory system can be damaged if inhaled.
► Check and wear your personal protective equipment.
► Only use the unit in rooms which are sufficiently ventilated.
► Make sure that all the seals on the unit are free of dirt.
► Always only operate the unit with the designated filters.
► Remove dust deposits in the surrounding area immediately using an industrial vacuum cleaner
of dust class H or a damp cloth.
EN - 10
xFUME™ ADVANCED HP 230V – CSA
BAL.0814.0 • V01
Publicité
