Fitting Electric Components; Installing Circuitry - Festo SLTE Notice D'utilisation

SLTE

Fitting electric components

Avoid external influence caused by mag
S
netic or ferritic parts in the vicinity of the
reference switch.
In this way you can ensure that the switch
functions faultlessly.
SLTE−...
Distance from mini−slides of the same
type L with proximity switch type:
1
SME−10..−...
SMT−10..−...
Distance from mini−slides of the same
type L with proximity switch type:
2
SME−10..−...
SMT−10..−...
Fig. 11
Place the reference switch only in the upper groove 2.
S
A groove sealed with a cover must not be used.

Installing circuitry

Note
If used in safety−relevant applications, additional measures are necessary.
In Europe, for example, the standards in the EC machinery directive must be
observed.
Without additional measures in accordance with statutory minimum
requirements, the product is not suitable for use in safety−related sections of
control systems.
34
Fig. 10
10
27 mm
27 mm
33 mm
35 mm
16
30 mm
24 mm
49 mm
53 mm
Festo SLTE 0910a English