Festo SLTE Notice D'utilisation page 40

SLTE
SLTE−...
System resolution of
encoder
Lead screw pitch
Gear unit ratio
Max. speed
Max. permitted speed
Max. acceleration
Electrical specifications
Rated motor voltage
Motor output
EMC specifications
Vibration (severity 1)
Shock (severity 1)
Protection class
Permitted temperature
range
Connecting tube
Weight (approx.) [kg]
50 mm stroke
80 mm stroke
100 mm stroke
150 mm stroke
1) Max. permitted speed and effective load depend on each other (see chapter
Characteristic curves")
2) The SLTE in conjunction with controller SFC−DC is intended for use in industrial ap
plications.
Fig. 17
40
10
512 pulses
per rotation
5 mm
n = 57:13
1)
170 mm/s
2 mm/s
2.5 m/s
To be used only in conjunction with controller SFC−DC
24 V DC
4.5 W
Interference emission standard to EN 61000−6−4 (in
dustry)
Immunity to interference as per EN 61000−6−2 (industry)
0.15 mm path at 10...58 Hz /
2 g acceleration at 58...150 Hz
15 g acceleration at 11 ms duration
IP40
0 ... + 40°C
Housing, slide,
moment compensator, drive rod:
Guide, spindle:
Bearing:
lene
0.57
0.74
.
2
2)
16
1000 pulses
per rotation
7.5 mm
210 mm/s
18 W
aluminium
steel
polyamide, polyethy
1.19
1.47
1.71
2.20
Festo SLTE 0910a English