Stihl MH 710.0 Notice D'emploi page 19

12 After Finishing Work
► If the PTO drive is no longer needed:
► Stop the engine.
► Attach the cover.
11.4 Switching the Headlamp On
and Off
► Press switch (1) on light switch (2).
The headlamp comes on.
► Press switch (3) on light switch (2).
The headlamp is switched off.
11.5 Holding and Guiding the Tiller
► Hold the tiller with both hands on handles (1)
so the thumbs enclose the handles.
11.6 Loosening Firm Soil or Working
Soil Additives into Loose Soil
► Remove the front wheel.
► Start the engine.
► Guide the tiller forwards and regulate the
working speed and working depth using the
blade spur.
► Move forwards slowly and in a controlled man‐
ner.
► If the hoes become blocked:
► Engage gear 0/R.
0478-404-9905-C
► Guide the tiller backwards slowly until the
hoes free themselves.
► Set the gear.
► Move forwards slowly and in a controlled
manner.
11.7 Tilling Loose Soil
► Remove the front wheel.
► Start the engine.
► Guide the tiller forwards and regulate the
working speed and working depth using the
blade spur.
► Move forwards slowly and in a controlled man‐
ner.
11.8 Making Furrows
► Remove the front wheel.
► Start the engine.
► Guide the tiller forwards and regulate the
working speed and working depth using the
blade spur.
► Move forwards slowly and in a controlled man‐
ner.
12 After Finishing Work
12.1 After Finishing Work
► Stop the engine.
► Allow the tiller to cool down.
► Attach the front wheel.
► If the tiller is wet: allow the tiller to dry.
► Clean the tiller.
► Clean the hoes.
English
19