Stihl MH 710.0 Notice D'emploi page 13

6 Assembling the Cultivator
Reuse washers (2) when attaching the transport
handle.
► Hold transport handle (4) against bracket (5)
so the front bores align.
► Insert bolts (6).
► Fit washers (2).
► Tighten nuts (7) to 35 Nm to 40 Nm.
Transport handle (4) is locked in place.
6.8 Attaching the Guard and Cov‐
ers
6.8.1 Attaching the Guard
► Position holders (1) so the bores align.
► Place washers (2) on bolts (3) and screw in.
0478-404-9905-C
► Position holder (4) so the bores align.
► Install washers (5) and bolts (6).
► Place washers (7) on bolts (6).
► Screw on nuts (8) and tighten firmly.
► Insert bolts (9) through guard plate (10).
► Place washers (11) on bolts (9).
► Screw on nuts (12) and tighten firmly.
6.8.2 Attaching the Covers
► Fit front cover (1).
► Connect light cable connectors (2 and 3).
English
13