Publicité
Les langues disponibles
Les langues disponibles
Press
to confirm the new set values or press
to quit the procedure and return to the
previous level without saving.
The time of the cycle end can be postponed by 24
hours using the quick key
If the set end time is later than the sum of
the times of phases 1, 3 and 4, the controller will
automatically increase the conservation time
(phase 2) until the time gap is filled.
To save the cycles set before execution, press the
icon at the top left.
Scroll through the recipe book pages with the
recipe list using the
desired position to save the recipe by assigning a
new name or overwriting an existing recipe; to end
the operation, confirm by pressing the ok
button.
.
or
and choose the
The automatic cycle starts with a pressure of the
area
and ends automatically at the end of
phase 4 and according to the set end time, with
an acoustic signal.
During a cycle in progress, the following screen
will be proposed:
During the manual cycle, the control keys are
displayed at the bottom of the screen. They
correspond to following features:
: turns the light on and off
manual settings (setpoint editing, display
the time of the individual phases and manual
defrost activation)
: display of inputs / outputs and alarms
The states of the main features are displayed
through icons on the top of the screen (see
previous chapters).
After a default inactivity time, the system goes into
"SCREEN SAVER" mode; the display shows the
values detected by the probes in use.
11
ENGLISH
GB
Publicité
