Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
5.4.
Automatic Cycle
By selecting the area
menu, the AUTOMATIC menu is loaded.
The phases composing a RETARDING PROVING
cycle are:
GB
Before starting a cycle, it is possible to access the
setpoint setting menu for each of the retarding
proving phase by pressing on the coloured area
corresponding to the phase to be edited.
To change the temperature and relative humidity
values, press the
scroll bar icon. Press
from the main
Interruption
Conservation
Awakening
Proving
Delayed cooking
and
keys or drag the
to confirm the new set
values or press
return to the previous level without saving.
In the lower left corner the CYCLE END icon
is displayed with the indication of the time
set by the user for the end of the cycle, while the
date and day of the week indicated are calculated
automatically by the controller based on the sum
of the times set for the single phases (from phase
1 to phase 4).
By pressing on the area
to edit the time of the cycle end.
Only upon confirmation of the time of cycle
end fine by means of the REFRESH key
will be possible to edit the date of cycle end,
which can only be postponed with respect to the
first useful date calculated by the controller.
10
to quit the procedure and
, it will be possible
, it
Publicité
