Publicité
Les langues disponibles
Les langues disponibles
IE
Content
Introduction ................................. 4
Intended purpose ......................... 4
General description ...................... 5
Extent of the delivery ........................ 5
Overview ........................................ 5
Functional description ....................... 5
Technical data .............................. 5
Charging time ................................. 6
Safety instructions ........................ 7
Symbols and icons ........................... 7
General safety instructions for
power tools ..................................... 7
Initial start-up ............................ 11
Checking the battery charge level .... 11
Inserting/removing the device's
battery pack .................................. 12
Selecting a tool .............................. 12
Changing the tool .......................... 12
Inserting an SDS Plus tool ................ 12
Removing an SDS Plus tool .............. 12
Inserting tools with hexagonal and
cylindrical shafts ............................ 12
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal. Before using the prod-
uct, familiarise yourself with all of
the operating and safety instructions.
Use the product only as described
and for the applications specified.
Keep this manual safely and in the
4
Removing tools with hexagonal and
cylindrical shafts ............................. 13
Removing the keyless chuck ............. 13
Operation .................................. 13
Selecting the operating mode .......... 13
Set the direction of rotation ............. 13
Switching on/off ............................ 13
Cleaning and maintenance ......... 14
Cleaning ....................................... 14
Maintenance ................................. 14
Storage ...................................... 14
Disposal and protection of the
environment .............................. 14
Guarantee ................................. 15
Repair Service ............................ 16
Service-Center ............................ 16
Importer .................................... 16
Replacement parts/accessories ... 17
Trouble shooting ........................ 17
Translation of the original EC
declaration of conformity ............ 65
Exploded drawing ..................... 69
event that the product is passed on,
hand over all documents to the third
party.
Intended purpose
The device is intended for impact drilling
into brick, concrete and rock, as well as for
non-impact drilling into wood, metal, cera-
mic and plastic. Electrical tools with electro-
nic regulation and right/left-hand rotation
are also suitable for screwing.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The user or operator is responsible for ac-
cidents causing injury to other people or
damage to property.
Publicité
