Publicité
Les langues disponibles
Les langues disponibles
IE
for steel ............................. max. 8 mm
Sound power level
(L
) ................... 86.5 dB(A), K
pA
Sound power level
(L
) .................. 97.5 dB(A); K
WA
Vibration max (a
) ... 8.6 m/s
h
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Charging time
(min)
PLGK 12 A1
PLGK 12 A2
PLGK 12 B2
PDSLG 12 A1
6
= 3 dB
pA
= 3 dB
WA
2
; K= 1.5 m/s
PAPK 12 A1
PAPK 12 A2
PAPK 12 A3
60
60
30
60
Try to keep the exposure to vibrations as
low as possible. An example of how to
reduce vibration exposure is limiting the
working hours. For this purpose all parts
of the operating cycle have to be con-
2
sidered (for example, times when the
electric tool is switched off and times
when it is switched on but running with-
out any load).
Charging time
The device is part of the Parkside X 12 V
TEAM series and can be operated with bat-
teries of the Parkside X 12 V TEAM series.
Batteries of the Parkside X 12 V TEAM se-
ries may only be charged using chargers of
the Parkside X 12 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries only:
PAPK 12 A1, PAPK 12 A2, PAPK 12 B1,
PAPK 12 B2
We recommend charging these batteries
with the following chargers:
PLGK 12 A1, PLGK 12 A2, PLGK 12 B2
An up-to-date list of battery compatibility
can be found at:
www.lidl.de/akku
PAPK 12 B1
PAPK 12 B2
PAPK 12 B3
60
120
60
120
45
60
45
60
PAPK 12 D1
150
150
80
80
Publicité
