IE
with the appliance. Cleaning and user
maintenance shall not be made by
children.
•
This appliance is not intended for use
by persons with reduced physical, sen-
sory or mental capabilities, or lack of
experience and knowledge.
•
Local regulations or bylaws may de-
termine the minimum age for using the
device.
•
The operator or user is responsible for
accidents or damage to other persons
or their property.
•
Children and persons with limited phy-
sical, sensory or mental capabilities
or inadequate experience and know-
ledge, or persons who are not familiar
with the instructions, should never be
allowed to use the machine! Local re-
gulations may specify an age limit for
the user.
•
Never let children or persons who are
not familiar with the instructions men-
tioned use the machine.
PREPARATION
•
Before each use, carry out a visual in-
spection on missing or wrongly mounted
protective devices or parts of the cutting
device.
•
Before commissioning and after any
impacts, check for signs of wear and
damages, and have any necessary re-
pairs performed.
OPERATION
•
Wear ear protection. Exposure to noise
can cause hearing loss.
•
Hold the appliance by the insulated
gripping surfaces when performing
work in which the tool may come into
contact with hidden wiring. Contact
with a live wire can also cause a char-
10
ge in metal parts of the appliance and
result in an electric shock.
•
Wear a dust protection mask.
WARNING! TOXIC DUST!
•
Working with harmful/toxic dust repre-
sents a health hazard for the operator
or persons in the vicinity.
CAUTION CABLES! DANGER!
•
Make sure that you do not come into
contact with electricity, gas or water
pipes/lines when working with the
power tool. If necessary, test with a
cable detector before drilling into a wall
or cutting into it.
•
Original accessories
Only use accessories that are specified
in the operating instructions and/or that
are compatible with the device.
MAINTENANCE AND STORAGE
•
Remove the removable battery before
carrying out maintenance or cleaning
work.
•
Use only spare parts and accessories
supplied and recommended by the ma-
nufacturer.
•
The machine must be checked regularly
and maintained. Have the machine
repaired in a licensed workshop.
8) ADDITIONAL SAFETY
INSTRUCTIONS
a) Hold the appliance by the insu-
lated gripping surfaces when
performing work in which the
tool may come into contact with
hidden wiring. Contact with a live
wire can also cause a charge in metal
parts of the appliance and result in an
electric shock.
b) Hold the device by the insulated
gripping surfaces when per-
forming work in which the cut-