Télécharger Imprimer la page

Parkside 385631 2107 Traduction Des Instructions D'origine page 11

Publicité

Les langues disponibles

Les langues disponibles

ting tool may come into contact
with hidden wiring or its own
cord. If the screw were to come into
contact with a live electrical cable,
metal parts of the appliance could
also become live and cause an electric
shock.
c) Ensure that the vents are free of soiling.
d) Remove the battery pack from
the power tool
- whenever the user no longer remains
in the vicinity of the machine.
- before the removal of blockages.
- before checking, cleaning or working
on the machine.
- after touching a foreign body in order
to check the machine for damage.
- for an immediate check if the machine
begins to vibrate excessively.
e) Do not use any accessories
that are not recommended by
PARKSIDE. This can result in electric
shock or fire.
9) RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.
Initial start-up
Place the rotational direction switch
into the central position before car-
rying out any work with the electri-
cal tool (e.g. maintenance, change
of tool etc.), as well as during trans-
portation and storage. There is a
risk of injury if the on-off switch is
accidentally activated.
Checking the battery charge
level
The battery's (
cated by the charge state indicator (
The LEDs indicate the battery's charge
level, when the device is in operation.
Press and hold the power button (
red-yellow-green => Battery fully charged
red and yellow
=> Battery half charged
red
=> Battery needs
For more information about the
rechargeable battery and charger,
please read the instruction manual
for your Parkside X 12 V Team se-
ries rechargeable battery.
9) charge level is indi-
to be charged
IE
6).
8).
11

Publicité

loading

Ce manuel est également adapté pour:

Pbha 12 a1