Before use
NOTE
►
The compressed air tool may only be operated using cleaned,
oil-atomised compressed air and the maximum operating pres-
sure of 6.3 bar must not be exceeded on the appliance. The
compressor must be fitted with a pressure reducer to regulate
the working pressure.
Lubrication
WARNING!
►
Find out about any health hazards posed by the oil you are
using by reading the safety datasheet provided by the
respective manufacturer.
►
Avoid eye and skin contact with lubricants.
NOTE
►
Regular lubrication is particularly important to avoid friction
and corrosion damage. We recommend using a suitable special
oil for compressed air tools (e.g. Liqui Moly compressor oil).
–
Lubrication with mist oiler
A mist oiler (not supplied) continuously and optimally
lubricates the appliance as a preparation stage after the
pressure reducer. A mist oiler gives off fine drops of oil into
the air flow and thus guarantees regular lubrication.
–
Manual lubrication
If you do not have a mist oiler, lubricate the tool before
every use or longer work sessions. Add 3–5 drops of
pneumatic oil into the connector nipple
│
GB │ IE
■
46
.
PDSS 16 A1