Publicité
Les langues disponibles
Les langues disponibles
Hazards caused by repetitive movements
■
Users of the compressed air tool may experience unpleasant
sensations in their hands, arms, shoulders, neck area or other
body parts.
■
Assume a comfortable position when working with the com-
pressed air tool, pay attention to safe footing and avoid unfavour-
able positions or such that make it difficult to keep your balance.
During work over longer periods, the operator should change
posture to avoid discomfort and fatigue.
■
If the operator notices symptoms such as persistent discomfort,
throbbing, pain, tingling, burning or stiffness, these warning in-
dications should not be ignored. The operator should consult a
qualified medical doctor.
Hazards caused by accessories
■
Separate the compressed air tool from the compressed air supply
before replacing the attachment or accessory.
■
Only use accessories that are intended for this appliance and
comply with the requirements and specifications listed in these
operating instructions.
■
Avoid direct contact with the accessory tool during and after use
because it may be hot or have sharp edges.
■
The permissible speed of the accessory tool used must be at least
as high as the maximum speed specified for the compressed air
tool. Accessories that rotate faster than the permissible rate can
break and throw pieces into the air.
■
Never fit a grinding disc, cutting disc or milling cutter. A bursting
grinding disc can lead to serious injuries or death.
■
Do not use discs that are damaged, cracked or have been
dropped.
│
GB │ IE
■
40
PDSS 16 A1
Publicité
