Kenwood Titanium Chef Baker KVL65 Instructions page 9

To Use Your Stand Mixer
Refer to Illustrations
1 Push the head-lift lever down and
raise the mixer head until it locks.
2 Fit the bowl, turn clockwise to lock.
3 Place the required tool into the
socket. Then push up and turn the
tool to lock into position.
Note: If the K-beater or Whisk are
not picking up ingredients from the
bottom of the bowl refer to the "Tool
Adjustment" section.
4 Lower the mixer head by pushing the
head release lever down and lower
the mixer head until it locks.
5 Plug into the power supply. Start
the machine by turning the speed
control to the desired speed setting.
Use the pulse (P) position for short
bursts of maximum speed.
6 After use, return the speed control
to 'O' OFF position and unplug your
Stand Mixer.
7 Release the tool by turning clockwise
to unlock from the tool socket and
then remove.
Hints
The fold function
folding light ingredients into heavier
mixtures for example meringues,
mousses, fruit fools, Genoese
sponges and soufflés, and to slowly
incorporate flour and fruit into cake
mixtures. The mixer will operate at a
constant slow speed.
Important
Ensure that no bowl tools are fitted or
stored in the bowl when using other
outlets.
A I
–
can be used for
To Use The Weighing
Function
Refer to Illustrations
1 Fit the bowl.
2 Press the on/zero button, the display
screen will flash ---- followed by 0.
3 Press the (kg/lb) button to select
either grams or ounces. The display
will default to kg/g when first
switched on.
* The unit weighs in 1g increments
and teaspoon/tablespoon measures
are recommended for weighing small
quantities.
*To zero press the on/zero button once.
4 Weigh the required ingredients
straight into the bowl.
Note: Always place the appliance on a
dry, flat, stable surface prior to weighing.
Do not apply pressure to the mixer or
bowl whilst weighing as this will affect
the accuracy of the scales. The weighing
function can be used with the mixer
head in either the down or up position.
Count up timer
During operation the display screen
will automatically operate as a count
up timer.
The timer will count up to 30
minutes and will pause (for up to 30
secs) when ever the speed control is
turned to the 'O' position.
To reset the timer to zero when the
machine is running press the ON/
ZERO button.
5
L
J
–