Parkside PTSG 140 C2 Traduction Des Instructions D'origine page 20

GB IE
earthed parts (e.g. pipes, radiators,
electric cookers, refrigerators).
• Keep other people away. Do not
allow other people, especially children,
to touch the power tool or cable. Keep
them away from your work area.
• Store unused power tools safe-
ly. Unused power tools should be
stored in a dry, high or locked place,
out of the reach of children.
• Do not overload your power
tool. They work better and more safely
within the specified power range.
• Use the correct power tool.
- Do not use low-performance ma-
chines for heavy work.
- Do not use the power tool for pur-
poses for which it is not intended. For
example, do not use use a circular
hand saw for cutting tree branches or
logs.
• Wear suitable clothing
- Do not wear loose clothing or jewel-
lery that might become caught in
moving parts.
- When working outdoors, non-slip
footwear is recommended.
- Wear a hair net to contain long hair.
• Use protective equipment
- Wear safety goggles.
- Use a dust mask for work which gen-
erates dust.
• Connect a dust extraction de-
vice. If connections are available for
dust extraction and collection devices,
make sure that these are connected
and properly used.
• Do not use the cable for purpos-
es for which it is not intended.
Do not use the cable to pull the plug
from the socket. Protect the cable from
heat, oil and sharp edges.
20
• Secure the workpiece. Use jigs or
a vice to hold the workpiece securely.
This is safer than using your hand.
• Avoid abnormal body postures.
Ensure secure footing and keep your
balance at all times.
• Maintain tools with care
- Keep cutting tools sharp and clean
for better and safer working.
- Follow the instructions for lubrication
and changing tools.
- Regularly check the connection cable
of the power tool and, if it is dam-
aged, have it replaced by a qualified
specialist.
- Check extension cords periodically
and replace them if they are dam-
aged.
- Keep handles dry, clean and free
from oil and grease.
• Remove the plug from the mains
socket when the power tool is not in
use, before maintenance and when
changing tools such as saw blades,
drill bits, cutters.
• Do not allow any tool keys to
remain inserted. Check, before
switching on, that keys and adjusting
tools have been removed.
• Avoid unintentional starting.
Make sure that the switch is off when
inserting the plug into the socket.
• Use extension cables outdoors.
Only use approved and appropriately
marked extension cables outdoors.
• Pay attention at all times. Pay
attention to what you are doing. Work
using common sense. Do not use the
power tool if you cannot concentrate.
• Check the power tool for possi-
ble damage
- Before further use of the power tool,
safety devices or slightly damaged