Parkside PHS 600 A1 Traduction Des Instructions D'origine page 26

GB IE
put away the power tool.
Such preventive safety measures
reduce the risk of starting the
power tool accidentaIly.
d) Store idle power tools out
of the reach of children
and do not allow persons
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
e) Look after the power tool
and application tool care-
fully. Check for misalign-
ment or binding of moving
parts, breakage of parts
and any other condition
that may affect the power
tool's operation. If dam-
aged, have the power tool
repaired before use. Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp
and clean. Properly main-
tained cutting tools with sharp
cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, ac-
cessories and tool bits etc.
in accordance with these
instructions, taking into
account the working con-
ditions and the work to be
performed. Use of the power
26
tool for operations different from
those intended could result in a
hazardous situation.
h) Keep handles and grip
surfaces dry, clean and
free from oil and grease.
Slippery handles and grip sur-
faces do not permit safe opera-
tion and control over the power
tool in unexpected situations.
5) SERVICE
a) Have your power tool ser-
viced by a qualified repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
Hedge trimmer safety
warnings
• Keep all parts of the body
away from the cutter
blade. Do not remove cut
material or hold material
to be cut when blades are
moving. Make sure the
switch is off when clearing
jammed material. A moment
of inattention while operating
the hedge trimmer may result in
serious personal injury.
• Carry the hedge trim-
mer by the handle with
the cutter blade stopped.