Parkside PHS 600 A1 Traduction Des Instructions D'origine page 24

GB IE
2) ELECTRICAL SAFETY
CAUTION! The following
states how to avoid accidents
and injuries due to electric
shock:
a) Power tool plugs must
match the outlet. Never
modify the plug in any
way. Do not use any
adapter plugs with
earthed (grounded) power
tools. Unmodified plugs and
matching outlets will reduce risk
of electric shock.
b) Avoid body contact with
earthed or grounded sur-
faces, such as pipes, ra-
diators, ranges and refrig-
erators. There is an increased
risk of electric shock if your
body is earthed or grounded.
c) Do not expose power
tools to rain or wet condi-
tions. Water entering a power
tool will increase the risk of elec-
tric shock.
d) Do not abuse the cord.
Never use the cord for
carrying, pulling or un-
plugging the power tool.
Keep cord away from
heat, oil, sharp edges or
moving parts. Damaged or
entangled cords increase the
risk of electric shock.
24
e) When operating a power
tool outdoors, use an ex-
tension cord suitable for
outdoor use. Use of a cord
suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool
in a damp location is una-
voidable, use a residual
current device (RCD) pro-
tected supply. Use of an
RCD reduces the risk of electric
shock.
3) PERSONAL SAFETY
CAUTION! The following
states how to avoid accidents
and injuries:
a) Stay alert, watch what
you are doing and use
common sense when
operating a power tool.
Do not use a power tool
while you are tired or un-
der the influence of drugs,
alcohol or medication. A
moment of inattention white op-
erating power tools may result
in serious personal injury.
b) Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust mask,
non-skid safety shoes, hard hat,