Parkside PHS 600 A1 Traduction Des Instructions D'origine page 22

GB IE
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Notes on Safety
Before working with the
equipment, familiarise your-
self with all operating com-
ponents. Practice handling
the equipment and have
the function, operation and
working methods explained
to you by an experienced
user or specialist. Ensure that
you can shut off the equip-
22
ment immediately in an emer-
gency. Inappropriate use of
the device may result in seri-
ous injury.
Symbols in the manual
Warning symbols with
information on damage
and injury prevention.
Hazard symbol with
information on the pre-
vention of personal in-
jury caused by electric
shock.
Instruction symbols with infor-
mation on preventing dam-
age.
Pull out the power plug be-
fore carrying out any work
on the equipment.
Help symbols with informa-
tion on improving tool han-
dling.
Symbols on the Equipment
Caution!
Read through the instruction
manual carefully.