Publicité
Les langues disponibles
Les langues disponibles
Safety Information
Dedicated clamping area for torque reaction.
Preferred clamping area.
This clamping area can be used as a secondary clamp-
ing. Do not use this area for torque reaction.
Prohibited clamping area.
Clamping on the motor shall always be selected as the
very last option and the operation shall be done with ex-
tra care.
General Installation Safety
Refer installation to qualified personnel only.
Hang the tool securely, by for example using a balancer.
When using a suspension yoke, check that it is in good con-
dition and correctly fastened.
For corded tools: Always connect the system to an earthed
outlet. Always make sure that the mains plug is disconnected
and the controller is turned off before connecting or discon-
necting the tool cable.
Connecting the tool to the controller
1.
Connect the cable to the tool.
TOP
TOP
Plug the cable with help of TOP indication.
Tighten the nut. No need to tighten it too much.
The locking system will prevent any loosening.
To enable the loosening of the cable, actuate the lock-
ing trigger at the bottom of the handle.
2.
Connect the cable to the controller.
2
1
Starting the tool
WARNING Risk Of Injury
As the reaction force increases in proportion to the tight-
ening torque, there is a risk of severe bodily injury of the
operator as a result of unexpected behavior of the tool.
Make sure that the tool is in perfect working order
►
and the system is programmed correctly.
All manuals and user guides at all-guides.com
Fit the tool with a suitable socket.
Select the appropriate program on the controller.
Hold the tool by means of the handle and apply to the fas-
tener to be tightened.
Press the trigger to start the tool.
How to reverse the rotation
1
Press this button.
Red and green LEDs are blinking alternatively.
Apply the tool to the fastener and press the trigger.
General Service and Maintenance Safety
Always keep the controller switched off during service in or-
der to avoid unexpected start-up.
Refer servicing to qualified personnel only.
Cleaning Instructions
Clean parts with a damp cloth. Only use water, no cleansers
containing solvents should be used.
Contact your Desoutter service technician for cleaning ad-
vice as per current recommendations and for your particular
tool.
C
A
General Power Tool Safety Warnings
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
8 / 204
Run reverse button
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
10/2020
Publicité
