Blackmagic Design 2110 IP Manuel D'installation Et D'utilisation page 9

Blackmagic Converters Setup
Blackmagic Converters Setup is a software utility used to change settings, configure networks
and update the internal software of your Blackmagic 2110 IP converter.
First, download and install the latest Blackmagic Converters software from the Blackmagic Design
support center at www.blackmagicdesign.com/support
To use Blackmagic Converters Setup:
1 Connect your Blackmagic converter to your computer via USB.
2 Launch Converters Setup. Your converter model will be named in the utility home page.
3 Click on the circular 'setup' icon or the image of your Blackmagic 2110 IP converter to open
the settings. If you have more than one converter connected to the network, use the arrows
on the sides of the setup window to navigate to the converter you want to access.
Setup
Setup settings let you change the name of your converter, change network settings, displays
the current version of your converter's internal software and view multicast output addresses.
Blackmagic Converters Setup 9