Blackmagic Design 2110 IP Manuel D'installation Et D'utilisation page 21

Blackmagic Converters Setup Settings
Additional settings available for the Blackmagic 2110 IP Mini BiDirect 12G converter
include the following.
Audio Tab
Adjust headphone and microphone levels using the audio tab.
Talkback
Adjust the headphone and microphone levels for talkback by dragging the sliders left to decrease
and right to increase. You can also adjust the volume using the buttons on the side of the converter.
Setup Tab
The setup tab has additional settings for camera control when connecting the converter
to an ATEM switcher.
SDI Camera Control
To ensure CCU and tally data from the ATEM switcher is sent to the correct camera, the
'ATEM camera ID' number should be set to match the ATEM's input number.
2110 Tab
Some broadcast equipment can only receive level A or level B 3G-SDI video. To maintain
compatibility with other broadcast equipment, select the 3G-SDI type to match the
connected device.
Blackmagic 2110 IP Mini Converter Models 21