Blackmagic Design 2110 IP Manuel D'installation Et D'utilisation page 19

Blackmagic 2110 IP Mini BiDirect 12G
Blackmagic 2110 IP Mini BiDirect 12G converter is a bidirectional converter so you can transmit
12G-SDI to SMPTE ST 2110 IP streams and vice versa simultaneously.
Featuring tally light and talkback functions, this converter can handle both the SDI camera feed
and the SDI program return in the one unit.
1
2
3
4
5
1 10G 2110 IP PoE+
Blackmagic 2110 IP Mini BiDirect 12G converter can be connected point to point or via a
managed 10G IGMP network switch. The converter also supports PoE+ power over Ethernet.
2 IP Input Lock LED
The IP input lock LED will illuminate when locked to an incoming SMPTE 2110 IP signal.
3 USB-C
USB-C port for configuring ST 2110 streams via Blackmagic Converters Setup utility and
updating the internal software.
4 Power +12V
Blackmagic 2110 IP Mini BiDirect 12G converters can be powered via an AC plug pack.
The supplied power cable included features a locking connector to prevent disconnection,
but you can also use any 18W 12V power cable or PoE+ to power your converter. A small
white LED light next to the USB-C port will illuminate when connected to a power source.
5 Tally
The tally indicator will illuminate red when connected to an ATEM switcher to indicate
on air status.
6 12G-SDI Out
12G-SDI video output BNC connector.
7 SDI Input Lock LED
The SDI input lock LED will illuminate when locked to an incoming SDI signal.
8 12G-SDI In
12G-SDI input BNC connector
9 Talkback
Connect an intercom headset equipped with a microphone into the 5 pin XLR socket
on the side.
6
7
8
9
Blackmagic 2110 IP Mini Converter Models 19