Blackmagic Design 2110 IP Manuel D'installation Et D'utilisation page 17

Blackmagic Converters Setup Settings
Additional settings available for the Blackmagic2110 IP Mini IP to HDMI converter include
the following.
Setup Tab
The setup tab has settings for HDMI levels and audio mapping.
HDMI Output
You can choose to clip the HDMI output using the setup tab. To ensure your HDMI output stays
within legal broadcast levels, select 'normal levels'. To allow video levels to conform to the SDI
input, select 'illegal levels'. We recommend using normal levels.
Audio Mapping
For 5.1 surround, select your desired audio mapping from either SMPTE or consumer standard.
LUTs Tab
Add a LUT to the HDMI output using the LUTs tab.
To add a 3D LUT on the HDMI output:
1 Click on the 'import' button.
2 Navigate to the location of the LUT you want to import and select it. Click 'save'. The name
of the LUT will appear in the field.
3 Click the 3D LUT on checkbox to turn the LUT on the output or off to stop displaying.
To remove the loaded LUT, simply click the 'delete' button.
Blackmagic 2110 IP Mini Converter Models 17