Publicité
Les langues disponibles
Les langues disponibles
Enjoying the sounds
20
ROT5307
POWER
6/1
Before operation, set [VOLUME] to the '"MIN" position,
1
Press [POWER, cb/l],
2
Press [A] and/or [B] to select the
speaker system(s) to be used.
SPEAKERS B is used if you connect another set of
speakers to the B terminals,
"SURROUND*' and ''SFC" cannot be turned on if [B] is
pressed. Press [A] to enjoy these modes.
(f the button is pressed once more, the indicator will switch
off and no sound will be heard from the speakers.
3
Turn [INPUT SELECTOR] to select
desired source.
(Refer to the appropriate operating instructions for details.)
The indicator corresponding to the selected source tights
and the source is shown on the display,
TAPE: To listen to cassette tapes
VCR: To watch video tapes
TV: To watch TV
DVD: To enjoy DVD
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
To watch a video (or DVD) or the TV, set the TV to either
the TV mode or VIDEO mode.
A
(only if you select TV, CD or DVD in the above step)
Press [DIGITAL INPUT] to select
"DIGITAL" or "ANALOG".
Switches between "DIGITAL" and "ANALOG" each time the
button is pressed.
The "DIGITAL INPUT" indicator lights when DIGITAL
selected.
5
Turn [DSP] to select the desired
mode.
The DSP indicator corresponding to the selected mode
lights and that mode is displayed.
Be sure to select the mode appropriate to the source you
are playing
Pages 18-19).
Dolby Digital and DTS sources cannot be played with the
SFC modes.
0
(only if you select SFC in the above step)
Turn [SFC MODE] to select the
desired SFC mode.
(continued on next page)
Publicité
