Publicité
Les langues disponibles
Les langues disponibles
4
Connecting the speakers to the receiver
Speaker cords
• Connect the cords so the numbers on the stickers
match the numbers under the terminals.
• Connect the red cords to the red terminals (+) and the
black cords to the black terminals (-)■
• Ensure the wire of the cords are fully inserted so they
do not touch each other and short circuit.
Rear of receiver
IJBHI
After you have completed set-up and connection, wind the excess
cord and keep together with string.
SPEAKERS
SUB-
CENTER SURROUND
FRONT
WOOFER
© 9
o o o o
Connect so the numbers on the stickers
match the numbers under the terminals.
Attaching to a wall
To attach vertically
Rubber feet
(included)
To attach horizontally
Screw
Attach four rubber feet to each speaker, ensuring they do not cover the holes. Screw the wood screw into a thick and hard part of the wall.
The surface you attach the speakers to must be able to support over 10 kg (22 lb). Consult your dealer for detail.
Attaching to speaker stands
Moving the brand plate
Ensure the following conditions are met when you purchase
your speaker stands.
• Screw; diameter: 5 mm, pitch: 0.8 mm. length: thickness of
stand plate plus between 7 and 10 mm.
Distance between the centers of the holes; 60 mm
• The stands must be able to support over 10 kg (22 lb).
• The stands must be stable even if the speakers are in a higl
position.
Attach the stands
with these holes.
You can turn the brand plate if you want to set up the small
speakers laying on their sides.
Ensure the plate doesn't get caught on the net when you turn it.
1
A
Caution
• Use
the
speakers
only
with
the
recommended system. Failure to do so may
lead to damage to the amplifier and/or the
speakers, and may result in the risk of fire.
Consult
a
qualified
service
person
(f
damage has occurred or if you experience
a sudden change in performance.
• Do not attempt to attach these speakers to
walls using methods other than those
described in this manual.
15
RQT5X7
Publicité
