Panasonic SC-HT280 Manuel D'utilisation page 23

Enjoying the sounds
TAPE MONITOR
TAPE
(MONITOR)
TAPE MONITOR
The TAPE (MONITOR) indicator
This indicator lights in the following two situations:
1. While TAPE is selected.
2. While TAPE MONITOR is in use.
To use the tape monitor
(For use when you have connected a graphic equalizer to. the
TAPE terminals.)
If [TAPE MONITOR) is pressed while a source other than TAPE is
selected, the 'TAPE (MONITOR)" indicator lights and the tape
monitor comes on.
Sources other than tape can still be selected with [INPUT
SELECTOR) while the 'TAPE (MONITOR)" indicator is on.
Press [TAPE MONITOR) again to turn the tape monitor off.
(^ See "Making a recording" on page 29 for details on how to use
the tape monitor during recording.)
ffBnn
• The tape monitor cannot be used when TV, DVD, or CD digital
input is being used.
• If you are using the tape monitor and you select a digital input
source, the tape monitor switches off.
• Depending on the settings on the graphic equalizer, there may
be some distortion.
23
RQT5307