Panasonic SC-HT280 Manuel D'utilisation page 33

To watch TV broadcasts
The procedures below are examples for when a TV and VCR are connected to the receiver as shown in this manual.
This remote control transmitter is designed for use with a home theater system. If you press [TV] (or [VCR]) and [ (b ] in succession, the TV
(or VCR) and receiver will be turned on and the selector on the receiver will change to TV (or VCR). Press [ 6 ] within 3 seconds of pressing
[TV] (or [VCR]),
To watch TV broadcasts
Point the remote
control toward the
TV and the receiver
TV 6
0^0
Switch ON the TV
and the receiver.
The receiver will
switch to TV input.
Point the remote
control toward
the TV
TV/VIDEO
^ o ^
Set the TV/VIDEO
mode on the TV'
to * TV".
Point the remote control .
toward the TV
1 2 3
VCH
O O or
ooo
6ci66
Select the desired channel.
If you allow more than 3 seconds to pass between pressing [TV] and [ (!) ], only the TV will be
operated.
Do not use this remote control to turn the TV ON and OFF if you are not using the receiver.
To watch TV broadcasts with a VCR tuner
Point the remote
control toward the TV
and the receiver
TV A
0^0
Switch ON the TV
and the receiver.
Point the remote control
toward the VCR and
the receiver
VCR
O
6
O
Switch ON the VCR.
The receiver will switch
to VCR input.
Point the remote control toward the VCR
Set the input
selector on
the VCR to
the "TUNER"
position
vch^a
O
ooo
6566
Select the desired channel.
Point the remote control
toward the TV
TV/VIDEO
O
Set the TVA/IDEO
mode on the TV
to "VIDEO".
If you allow more than 3 seconds to pass between pressing [VCR] and [ 6
I
only the VCR will be
operated.
Do not use this remote control to turn the VCR ON and OFF if you are not using the receiver.
To switch OFF the TV
0^0
To switch OFF the VCR
VCR
0^0
Turn the receiver OFF last.
This button is used when using ENTER to select a channel on a TV or VCR
which has not been manufactured by this company.
33
nQT5307