Parkside PGHSA 12 C3 Traduction Des Instructions D'origine page 32

GB MT
Read and take note of the operating
manual belonging to the machine
Wear protective goggles.
Always use the chainsaw with both
hands.
Beware of chainsaw kickback
and avoid touching the guide rail
tip.
Remove the battery prior to
servicing the appliance.
Do not expose the unit to rain. The
device must not be wet, nor should
it be operated in a moist environ-
ment.
Cutting hazard!
Keep hands away.
156 mm
Length of the chain bar
Machines do not belong with do-
mestic waste.
Guaranteed sound power level
90
This device is part of the
X 12 V TEAM series
Graphical symbol on the blade:
Cutting unit
Groove width
Chain pitch
Number of driving elements
32
Graphical symbol above the chain
sprocket:
Saw chain oiling.
Observe direction of travel of the saw
chain. Attention! Read the instruction manual.
Graphical symbol on the blade:
Direction of travel of the saw
chain
Graphical symbol on the fixing screw for
the chain sprocket cover:
OPEN
CLOSE
General Safety Directions for
Power Tools
WARnInG! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).