Parkside PGHSA 12 C3 Traduction Des Instructions D'origine page 37

b) avoid an abnormal work posture and
do not saw above shoulder height. This
prevents unintentional contact with the
rail tip and enables better control of the
garden pruner in unforeseen situations.
c) Only use replacement bars and chains
specified by the manufacturer. Incorrect
replacement bars and chains may cause
chain breakage and/or kickback.
d) Follow the manufacturer´s sharpen-
ing and maintenance instructions for
the saw chain. Decreasing the depth
gauge height can lead to increased
kickback.
Further safety directions
• Comply carefully with maintenance,
control and service instructions in this
manual.
Damaged protective devices and parts
have to be repared or changed except
as noted otherwise in this manual.
• It is recommended that a first-time user
at least practice the cutting of logs on a
saw log or frame.
• For sawing work on hillsides, always
stand in the area above the log.
To keep total control while sawing
through, reduce the pressure at the end
of the cut without loosening your grip
on the handles of the garden pruner.
Make sure the saw chain does not
touch the ground. After finishing the
cut, wait until the garden pruner comes
to a stop before removing it there. Al-
ways switch off the motor of the garden
pruner before changing between trees.
• Dirt, stones, loose bark, nails, clips and
wires must be removed from the tree.
• Do not use any accessories that are not
recommended by PARKSIDE. This can
result in electric shock or fire.
Residual risks
Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without
ear protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain circum-
stances, may impair the functionality of ac-
tive or passive medical implants. To reduce
the risk of serious or lethal injuries, we rec-
ommend that persons with medical im-
plants consult their doctor and the manu-
facturer of their medical implant before
operating the machine.
Observe the safety information and
notes on charging and proper use
as shown in the instruction manual for your
battery and charger from the X 12 V Team
series. A detailed description of the charg-
ing process and further information can be
found in the separate operating instructions.
Assembly
Always wear protective
gloves when working with
the chainsaw and employ
only original parts.
Risk of injury!
GB MT
37