Parkside PWSA 12 B1 Traduction Des Instructions D'origine page 5

General description
See the front fold-out page for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Device
- Cutting disc (only for non-ferrous metals)
(preassembled)
- Hex key (4 mm)
- Storage case
- Instruction manual
Battery and charger are not included.
Description of functions
The cordless angle grinder is suitable for
cutting and grinding metal, stone and wood
materials, plastic, tiles and non-ferrous met-
als. There is a special disc for each of the
separate applications. Please refer to the
information from the disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Protective hood
2 Cutting disc
3 Clamping screw
4 Spindle stop button
5 On/off switch
Battery Indicator (3 LEDs)
6
7 Handgrip
8 Battery release button
9 Battery
10 Storage case
11 Hex key
12 Mounting flange
13 Clamping flange
Technical data
Cordless angle grinder .. PWSA 12 B1
Rated input voltage .....................
Idling speed (n) .....................19000 min
Weight (without battery,
without cutting disc) ................. 0.68 kg
Dimensions of cutting/
grinding disc ................ Ø 76 x 10 mm
Bore hole ................................ Ø 10 mm
Maximum diameter
Cutting/grinding disc ............ Ø
Thickness of cutting/
grinding discs .................. max. 6,5 mm
Grinding spindle thread ..................... M5
Sound pressure level
(L ) .................... 63,1dB(A); K
pA
Sound power level (L
measured .......... 74,1 dB(A); K
Vibration (a
) ....2,275 m/s
h
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
The vibration values represent maximum val-
ues which have been determined with the sup-
plied blade. The actual vibration values may
vary depending on the used accessories.
The vibration values are still affected by the
handling for the user's.
Cutting disc PTS 76 (included):
Idling speed n ................. 20300 min
max
Disc speed v .................... max. 80 m/s*
0
Outer diameter ........................ Ø 76 mm
Bore hole ................................ Ø 10 mm
Thickness ...................................... 1 mm
*
The grinding disc must keep a rotational
speed of 80 m/s.
You can use all grinding tools mentioned in
these operating instructions.
GB IE NI
12 V
76 mm
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1,5 m/s
2
-1
2
-1
5