Parkside PWSA 12 B1 Traduction Des Instructions D'origine page 13

gloves, respiratory protection and ear
protection when grinding, brushing
and cutting.
• Never keep the fingers between the
grinding disc and spark protection
or in close proximity to the protective
hoods. There is a risk of crushing.
• The rotating parts of the device cannot
be covered due to functional reasons.
Therefore, proceed cautiously and hold
the workpiece firmly in order to avoid
slipping which could cause your hands to
come into contact with the grinding disc.
• The workpiece gets hot during grinding.
Do not touch the machined area, allow
it to cool down. There is a risk of burn-
ing. Do not use coolants or the like.
• If you are tired or have consumed al-
cohol or tablets, do not work with the
device. Always have a break on
• Turn off the device and remove the bat-
tery from the device before servicing
the device.
• Do not use any accessories that are not
recommended by PARKSIDE. This can
result in electric shock or fire.
Residual risks
Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Lung damage if suitable respiratory
protection is not worn.
b) Hearing damage if suitable ear protec-
tion is not worn.
c) Damage to health due to
- touching the area of the grinding tool
which is not covered;
- ejection of parts of workpieces or
damaged grinding discs.
d) Health injuries which result from swinging
hand and arm, in the
is used over a longer period of time or is
not used and maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Observe the safety informati-
on and notes on charging and
proper use as shown in the
time.. instruction manual for your
battery and charger from the
Parkside X 12 V Team series.
A detailed description of the
charging process and further
information can be found in
the separate operating inst-
ructions.
Assembly
Caution! Risk of injury!
- Ensure that you have sufficient
Set protective hood
Adjust the protective hood such that any
sparks or detached parts cannot hit either
the user or any bystanders.
The protective hood must also be positioned
such that the sparks cannot ignite combustible
parts, including those in the surroundings.
GB
event that the device
space in which to work, and that
you do not endanger other people.
IE NI
13