Publicité
Les langues disponibles
Les langues disponibles
Under standby mode, if no any cooking zone heating operation, the
appliance will go into shutdown status automatically after 10s and beep
once.
Heating control
Under standby mode, you can choose the cooking z one by pressing
the cooking zone select button, then press plus or minus button or to
adjust the power level of the corresponding cooking z one. Press and
hold plus "
decrease the power level.
When the hob top is in heating status, press and hold "
button for 3s to switch off, and stop all the cooking zones to heat. The
corresponding cooking zone indicator of the hob top which has heated
before will display high temperature warning symbol " ".
Under st andby m ode, i f some hob tops still exist residual heat, display
will show " ".
If needing t o switch off o ne o f t he c ooking z ones, y ou can se lect t hat
zone f irst, then press the minus button "
switch off that zone, and will not affect the heating of the other
cooking zones. When power level reaches "0", the corresponding
cooking zone indicator of the hob top which has heated before will
display high temperature warning symbol " ".
If more t han one zone is operating at the same t ime, total power w ill
equal to the sum of the powers of all the working cooking zones, each
cooking zone will work according to their power modulation ratio, and
will not affect each other.
Note: 1. During the same period,only one hob top button is valid,that is
only one decimal point " " can be displayed.
2. Press minus button "
heating hob top will close automatically.
" or minus "
EN-15
" buttons can continuously to increase or
" until "0" power l evel to
"to set the power level to "0",then the
" power
Publicité
